AMP: Morimoto XB55 2.0 50 Watt HID Ballast

$60.00

Morimoto

Ballast

Clear

Igniter

Clear

Product Description

Trusted: With global distribution exceeding a half-million units over the last six years; more enthusiasts chose Morimoto over any other aftermarket ballast in the world. By adopting everything that was good about the out-going design and tossing the rest out the window, the XB55 2.0 excels in every way.

 

Reliability: When two of the best names in ballasts get together to create something new, good things happen. The new XB is essentially a Hylux + Morimoto mash up, and we are proud to bring their new ballast baby to North America! Designed to last for 2500 hours and we’re confident they will. The powerful AS15-G4 IC chip recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct. The software is proprietary to this ballast alone.

 

Protected: The die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.

 

Compact: Slim 18mm body will mount almost anywhere, and that’s OK because they’re fully sealed from the elements. There are four mounting points cast directly into their shell, no spare brackets to mess with..

 

Versatile: Since the igniter cord can be unplugged from the HID ballast computer, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.

 

Fast, Friendly and Efficient: Power hungry HID ballast replacements never work well with tricky CanBus systems, but the new Morimoto XB55 2.0 ballast consumes less than HALF of the start current than the previous model did. Far less than Denso, Mitsubishi, or FastBright which makes their ability to reach full intensity a more efficient process.

 

Modern: Like all modern OEM ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.

 

Mature: The XB55 2.0 features countless advancements from the most popular OEM ballasts. In terms of modern headlight tech, High Intensity Discharge is now fully matured; and therefore the aftermarket gets the full benefit engineering progress in the OEM world. Time will tell, but we doubt there ever be an “XB 3.0” ballast from Morimoto. This could be the grand finale, folks!

 

Functional Works of Art: Designed in California by Morimoto’s engineer, Yoshi Ishida, the Morimoto XB55 2.0 HID Ballasts are just as good looking on the outside as they are well-engineered on the inside. Stainless Steel hardware. TechFlex braided insulation. Embossed circuitry on the shell. We most admire how the laser-engraved graphics on the rear incorporate the potting-ports into the design. All about the details!

 

Trusted: For over a decade, HID Kit Pros in Issaquah, Washington has been providing customers with the best quality automotive lighting and accessories while backing it up with unbeatable customer service. Every employee at HKP has been trained on our wide selection of products to help suit each and every customers needs. Local? Stop by our showroom and installation center, test out our products in person with our state of the art testing equipment. Have a question? Contact us.

 

 

What’s Included

  • Ballast: 1x Morimoto XB55 2.0 (Sold Individually)
  • Igniter: Morimoto XB AMP
  • Bracket: Eight Point Painted Steel
  • Warranty: Two Years

Compatibility

  • Input: Industry Standard “9006” Plug
  • Output: AMP

Electrical

  • Wattage Output: 50W
  • Ignition Voltage: 23KV
  • Input Voltage: AC 9-32V
  • Input Current: < 5A
  • Open Circuit: Protected (< 1s)
  • Short Circuit: Protected (< 1s)
  • Climate Range: -40C to +85C
  • Rated Lifetime: 2500 hours (6-10 years)

Additional Information

Weight 0.01 lbs
Shipping Dimensions 5 x 3 x 2 in
Brand

Morimoto

Warranty

2 Years

Shipping

Ships Same Day

Wattage

50 Watt

Sold

Individually

Reviews

Be the first to review “AMP: Morimoto XB55 2.0 50 Watt HID Ballast”

Fitment

Make Model Year

You may also like…

  • HYLUX HID High Efficiency Ballast – 50 Watt | A0050

    SKU: A0050 $54.95 Select options
  • HYLUX HID CAN-Bus Ballast – 50W | 2A50

    SKU: 2A50 $69.95 Select options
  • HYLUX HID High Efficiency Ballast – 35 Watt | A2088

    SKU: A2088 $49.95 Select options