HYLUX HID High Efficiency Ballast – 35W | A2088

$49.95

HYLUX
Clear

Product Description

Quality – The A2088 35W Quick Start HYLUX HID replacement ballasts are 100% waterproof and fully sealed in electrically-safe sealant which is also known as “potting”. Many electronic ballasts are simply coated with a protection sealant, not HYLUX. HYLUX ballasts are fully sealed to the top allowing for a waterproof and shockproof digital HID ballast. These ballasts will work with single beam and bi-xenon bulbs with AMP connections.

 

HYLUX –  is known for being the top of the line OEM quality in the aftermarket HID industry and remains that way today. They began by working with Philips as an authorized manufacturer of their bulbs and now create the greatest xenon products money can buy. They have created a ballast that does it all; quick start up time, eliminates flickering and radio interference to name a few. Many companies have tried to compete with the quality and technology put into these ballasts. Guaranteed genuine HYLUX brand. HYLUX also produces a 50W version of this ballast found here, A0050.

 

Components – The key component of all HID ballast is the “controller” which controls all functions from the initial ignition to continually ensuring the xenon gas inside the bulb stays ignited. The quality of every ballast starts with the controller inside. With the OEM-grade external 23kV igniter, which is also fully waterproof, this ballast will strike the bulb perfectly, every single time. It will function in even the coldest of environments, with a rated minimum operating temperature of -40 degrees.

 

Trusted – For over a decade, HID Kit Pros in Bellevue, Washington has been providing customers with the best quality automotive lighting and accessories while backing it up with unbeatable customer service. Every employee at HKP has been trained on our wide selection of products to help suit each and every customers needs. Local? Stop by our showroom and installation center, test out our products in person with our state of the art testing equipment. Have a question? Contact us.

 

HID Ballast Controller Types:

1. CPU Controller

2. ASIC Controller

1. CPU Controller: All HID ballasts made in china or Taiwan use a CPU programming controller, the program is easy to copy, and the machine to create them can cost about $3,000 to buy, therefore any engineer could make a ballast in his living-room. With that, many are rapidly creating low quality ballasts and offering a very cheap price in order to earn the largest profit. A CPU controller cannot monitor the HID bulb (lamp power continually changes), and the lamp power does not properly correspond with the CPU program and ends up burning out the ballast. The defect rate is much higher and the ballast life is short with a CPU controlled ballast system.

2. ASIC Controller: HYLUX’s ballast uses an ASIC chip controller which is created without a program inside, the same way HELLA & Matsushita manufacture their ballasts for brands like Audi, BMW and other high end manufacturers. An ASIC chip is difficult to design and in turn comes with an expensive price tag. HYLUX spent nearly $600,000 to develop the chip which is made with powerful components of real-time lamp-monitoring & power compensation with full-time ballast protection circuitry. HYLUX now manufactures and produces ballasts for top names in lighting from Philips to Matsushita with the highest quality components. Go ahead, search the internet for reviews, you will find that HYLUX ballasts are the king of automotive lighting.

Not sure if these are what you need? Give us a call, send us an email, we are happy to help. Seriously, no question is a dumb question.

 

 

Wattage Output: 35W

Power Type: AC

Ballast Model: A2088

Input Voltage: 9 – 32V

Input Current: 3.35A @ 12.4V DC

Starting Current: 8-10A @ 12.4V DC

Waterproof: Yes

Warranty: 3 Years

Sold: Individually

See our comparison guide between AC and DC ballasts to make sure you are getting the highest quality ballast for your money.

Additional Information

Weight 1.20 lbs
Shipping Dimensions 7 × 4 × 2 in
Wattage

35 Watt (Standard)

Brand

HYLUX

Warranty

3 Years

Shipping

Ships Same Day

Sold

Individually

Ballast

HYLUX A2088 Quick Start

Reviews

  1. :

    got these as part of a kit for my 2018 4runner and also previous truck (tundra), these are rock solid ballasts, look good, perform well and havent had a single issue (ebay junk one would turn on and then the other). They are definitely pricer than i used to pay off amazon but i wont go back to cheap junk after these, do it once, do it right and i never have to mess with the wifes headlights again.

  2. :

    Replaced my XB35 ballasts from morimoto with hylux after reading all the poor reviews about morimoto recently, best decision i have made. always turn on, even in neg. temps in Alaska. no annoying loud buzzing. quality ballasts, much happier with these.

Add a review

Fitment

Make Model Year

You may also like…

  • HYLUX HID CAN-Bus Ballast – 35W | 2A88

    SKU: 2A88 $59.95 Select options
  • HYLUX HID CAN-Bus Ballast – 50W | 2A50

    SKU: 2A50 $69.95 Select options
  • HYLUX HID High Efficiency Ballast – 50W | A0050

    SKU: A0050 $59.95 Select options